Function Control
1Enter Function Control mode Press the [FNC] button. Function icon is displayed.
2Select your desired setup itemOperation typeMovement between items
Selection of item
Return to previous item | Press the [FNC] button or“ | ” icon. | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TYPE SIDE TEXT
In this manual, the above selection is indicated as
Select “DISP” > “TYPE”.3Make a settingTurn the Control knob to select a setting value, and then press the Control knob.
•The value of items with 
mark can be set by pushing the Control knob towards right or left.
•Some items require you to keep pressing the Control knob for 1 or 2 seconds so that you can make a setting. For these items, the time during which you need to keep pressing the Control knob is displayed in the Entry column in seconds.
•For the functions accompanied by the description of the setting procedure and so forth, the reference page numbers are displayed.
4Exit Function Control modePress the [FNC] button for at least 1 second.Display Settings
About Display Type
Shown below are examples of display types.
Display |
| Display Type |
|
| |||
“TYPE [A]” |
|
|
|
|
|
|
|
|
| 3 |
|
| 1 |
| |
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
“TYPE [B]” |
|
2 |
31
“TYPE [C]”
1
45
“TYPE [D]”
6
1 Text display part
2 Status display
3 Icon display part
4 Display (varied depending on the source)
5 Spectrum Analyzer display
⁄
•To select the Chinese display type, select “ON” in “MENU” > “Chinese” of <Function Control> (page 6).
Text Display Selection
Changing the text display.
In Tuner source| Information |
| Display |
Station name |
| “SNPS” |
Frequency |
| “Frequency”/”FREQ” |
Spectrum Analyzer & Clock |
| “Speana/Clock”/”SPEANA” |
Date |
| “Date”/”DATE” |
Blank |
| “Blank”/”BLANK” |
Information
Disc title
Track title
Play time & Track number
Disc name
Spectrum Analyzer & Clock
Date
Blank
Display
“Disc
“Track
“DNPS”
“Speana/Clock”/”SPEANA”
“Date”/”DATE”
“Blank”/”BLANK”
8