Manual position setting

Making fine adjustment of the value specified at Preset position selection per speaker.

1Enter Position setting mode

Select “SOUND” > “S-CTRL” > “POSIT” > “M-POSI”.

For how to select Function Control item, refer to <Function Control> (page 6).

2Select the Position you want to adjust

Item

Setting overview

“Front Lch”

Front Left speaker

“Front Rch”

Front Right speaker

“Rear Lch”

Rear Left speaker

“Rear Rch”

Rear Right speaker

“Sub Lch”

Subwoofer Left

“Sub Rch”

Subwoofer Right

Turn the Control knob and push the center when the desired item is displayed.

3Adjust the speaker Turn the Control knob. Adjust between 0 and 170 cm.4Exit Position setting mode Press the [FNC] button.

⁄

•When you select “User” at <Preset position selection> (page 18), the adjusted setting value will be recalled.

Audio Preset Memory

Registering the value setup by Sound Control. The memory cannot be erased by the Reset button.

1Setup Sound Control

Refer to the following operations to setup the Sound Control.

-Cabin selection (page 17)

-DTA (Digital Time Alignment) setting (page 17)

-X’Over setting (page 17)

-Equalizer Control (page 18)

-Preset position selection (page 18)

-Manual position setting (page 19)

2Enter Audio Preset Memory mode Select “SOUND” > “PRESET” > “MEMO”.

For how to select Function Control item, refer to <Function Control> (page 6).

3Put the Audio Preset in the memory Press the Control knob.

“Memory?” is displayed.

4Turn the Control knob to select “YES”, and then press the Control knob.

“Memory Completed” is displayed.

5Exit Audio Preset mode Press the [FNC] button.

⁄

•Register 1 pair of Audio Preset Memory. You cannot register by the source.

•When you press the Reset, all the sources will be the setting value which is registered.

Audio Preset Recall

Recalling the sound setup registered by <Audio Preset Memory> (page 21).

1Select the source

For how to select source item, refer to <Power/ Source Select button> of <Basic Operation> (page 4).

2Enter Audio Preset Recall mode Select “SOUND” > “PRESET” > “RECALL”.

For how to select Function Control item, refer to <Function Control> (page 6).

3Recall the Audio Preset Press the Control knob. “Recall?” is displayed.

4Turn the Control knob to select “YES”, and then press the Control knob.

“Recall Completed” is displayed.

5Exit Audio Preset Recall mode Press the [FNC] button.

⁄

•The User memory of “SYSTEM Q” in <Equalizer Control> (page 18) is changed to the value which was recalled.

•The source tone memory item of <Equalizer Control> (page 18) is changed to the value which was recalled by the selected source.

English 19