Kenwood DPX-MP6110U Station/Disc Naming (SNPS/DNPS), Opening message edit, Button, Operation, Character, Operation, Times pressed, Operation type, Character type, Operation type

Station/Disc Naming (SNPS/DNPS)

Attaching a title to a Station or CD.

1Receive/play the station/disc you want to attach a title to2Select Name set mode item during Menu mode

Select the “Name Set” display.

For how to select Function Control items, refer to <Function Control> (page 6).

3Enter Name set modePress the Control knob for at least 1 second.4 Enter the name

Operation type	Operation
Move the cursor to the enter	Push the Control knob towards right
character position	or left.
Select the character type*	Press the Control knob.
Select the characters	Turn the Control knob or push it
	towards up or down.

*Each time you press the knob, the character type alternates between the types shown in the table below.

Character type	Alphabet upper case
	Alphabet lower case
	Numbers and symbols
	Special characters (Accent characters)

⁄

•Enter characters by using a remote control with numbers buttons.

Example: If you are entering “DANCE”.

Character	“D”	“A”	“N”	“C”	“E”
Button	[3] [¢] [2] [¢] [6] [¢] [2] [¢] [3]
Times pressed	1	1	2	3	2

5Exit Menu mode Press the [FNC] button.

⁄

•A title cannot be attached to Audio file media.

•When operation stops for 10 seconds the name at that time is registered, and Name Set mode closes.

•Memory numbers

-FM/AM: 30 stations

-Internal CD player: 10 discs

-External CD changer/ player: Varies according to the CD changer/ player. Refer to the CD changer/ player manual.

•Change the title of station/CD by the same operation used to name it.

Opening message edit

Setting the opening message to be displayed when the power is turned on.

1Select Opening message edit item during Menu mode

Select “OPENING MSGE Edit”.

For how to select Function Control items, refer to <Function Control> (page 6).

2Enter Opening message edit modePress the Control knob for at least 1 second.3Enter the character

Operation type	Operation
Move the cursor to the enter	Push the Control knob towards right
character position	or left.
Select the character type*	Press the Control knob.
Select the characters	Turn the Control knob or push it
	towards up or down.

*Each time you press the knob, the character type alternates between the types shown in the table below.

Character type	Alphabet upper case
	Alphabet lower case
	Numbers and symbols

4Press the Control knob for at least 2 seconds. “Completed” is displayed.

5Exit Menu mode Press the [FNC] button.

⁄

•The Opening message can be displayed up to 8 characters.

English 11