Tuner features

Function of remote control

Direct Access Tuning

Entering the frequency and tuning.

1Select the bandPress the [FM] or [AM] button.2Enter Direct Access Tuning modePress the [DIRECT] button on the remote control.

"– – – –" is displayed.

3Enter the frequencyPress the number buttons on the remote control.

Example:

Desired frequency

Press button

92.1 MHz (FM)

[0], [9], [2], [1]

810 kHz (AM)

[0], [8], [1], [0]

Cancelling Direct Access Tuning

Press the [DIRECT] button on the remote control.

⁄

•You can enter the FM band frequency in steps of a minimum of 0.1 MHz.

Station Preset Memory

Putting a station in the memory.

1Select the band

Push the Control knob towards [FM] or [AM].

2Select the frequency to put in the memory Push the Control knob towards [4] or [¢].

3Put the frequency in the memoryPress the desired [1] — [6] button for at least 2 seconds.

The preset number display blinks 1 time.

On each band, 1 station can be put in the memory on each [1] — [6] button.

Auto Memory Entry

Putting stations with good reception in the memory automatically.

1Select the band for Auto Memory Entry Push the Control knob towards [FM] or [AM].

2Open Auto Memory EntryPress the [AME] button for at least 2 seconds. "A-MEMORY" is displayed.

When 6 stations that can be received are put in the memory Auto Memory Entry closes.

⁄

•When the <AF (Alternative Frequency)> (page 28) is ON, only RDS stations are put in the memory.

•When Auto Memory Entry is done in the FM2 band, the RDS stations preset in the FM1 band are not put in the memory.

Likewise, when Auto Memory Entry is done in the FM3 band, RDS stations preset in FM1 or FM2 are not put in the memory.

Preset Tuning

Recalling the stations in the memory.

1Select the band

Push the Control knob towards [FM] or [AM].2Recall the stationPress the desired [1] — [6] button.

14 English