Menu system

In Standby mode

Manual Clock Adjustment

⁄

•You can do this adjustment when the <Synchronize Clock> (page 26) is set as OFF.

1Select Clock Adjustment modePush the Control knob towards up or down. Select the "CLK ADJ" display.2Enter Clock Adjust modePress the Control knob for at least 1 second. The clock display blinks.3Adjust the hours

Push the Control knob towards up or down.

Adjust the minutes

Push the Control knob towards right or left.

4Exit Clock adjustment mode Press the [MENU] button.

In Standby mode

Synchronize Clock

Synchronizing the RDS station time data and this unit’s clock.

Display

Setting

"SYNC ON"

Synchronizes the time.

"SYNC OFF"

Adjust the time manually.

⁄

• It takes 3 to 4 minutes to synchronize the clock.

Display Illumination Control

This function turns off the display when you perform no operation for 5 seconds. This function is effective when you are driving at night.

Display

Setting

"DISP ON"

Keeps the display on.

"DISP OFF"

Turns off the display when you perform no

 

operation for 5 seconds.

⁄

•Set the Display Illumination Control when the <Demonstration mode Setting> (page 31) is set to OFF.

•When the display is off, pressing any key will turn on the display.

•When the display is off, you cannot perform any operation except for the following:

•Volume

•Attenuator

•Selecting the source

•Ejecting the disc

•Turning off the power

•USB remove mode

•During function control, such as the Menu System, the display stays on.

In Standby mode

Dimmer

Dimming this unit’s display automatically when the vehicle light switch is turned ON.

Display

Setting

"DIM AUTO"

The display dims.

"DIM OFF"

The display doesn’t dim.

In Standby mode

Switching preout

Alternating the preout between the rear and subwoofer. (With the subwoofer the sound outputs without being effected by fader control.)

Display

Setting

"SWPRE R"

Rear preout.

"SWPRE SW"

Subwoofer preout.

26 English