Manuals / Brands / Car Audio and Video / Car Stereo System / Kenwood / Car Audio and Video / Car Stereo System

Kenwood DPX502U Removing the Hard Rubber Frame (escutcheon), Removing the Unit

1 44

Download 44 pages, 875.31 Kb

Removing the Unit

Removing the Hard Rubber Frame (escutcheon)

1Engage the catch pins on the removal tool 2 and remove the two locks on the lower level.

Lower the frame and pull it forward as shown in the figure.

2When the lower level is removed, remove the upper two locations.

•The frame can be removed from the top side in the same manner.

Removing the Unit

1Refer to the section <Removing the Hard Rubber Frame> and then remove the hard rubber frame.

2Remove the Hex-head screw with integral washer (M4X8) on the back panel.

3Insert the two removal tools 2 deeply into the slots on each side, as shown.

4Lower the removal tool towards the bottom, and pull out the unit halfway while pressing towards the inside.

•Be careful to avoid injury from the catch pins on the removal tool.

5Pull the unit all the way out with your hands, carefully not to drop it.

Lock Catch

Accessory2

38 English

Contents

Page Safety precautions Menu system Notes General features Tuner features 2WARNING To prevent injury or fire, take the following precautions: 2CAUTION To prevent damage to the machine, take the following precautions: Do Not Load 8 cm (3 in.) CDs in the CD slot How to reset your unit Cleaning the Unit Before using this unit for the first time About KENWOOD "Music Editor" of PC application attached to DPX502U/ DPX502UY About Audio file About USB device About DAB Tuner control Handling CDs CDs that cannot be used The marking of products using lasers (Except for some areas) Power Selecting the Source Volume Attenuator System Q Audio Control Adjusting the detail of Audio Control Audio Setup Speaker Setting Subwoofer Output TEL Mute Switching Display Tuning Direct Access Tuning Station Preset Memory Auto Memory Entry Preset Tuning Traffic Information Radio Text Scroll PTY (Program Type) Program Type preset Changing Language for PTY Function Playing CD & Audio file USB Device Connection Playing USB (iPod) device Drive Search Playing External Disc Fast Forwarding and Reversing Music Search Disc Search/Folder/Album Search Direct Music Search Track/File/Disc/Folder Repeat Scan Play Random Play Magazine Random Play All Random Play File select File Select 1 mode File Select 2 mode Text/Title Scroll Menu System Security Code Touch Sensor Tone Manual Clock Adjustment Synchronize Clock Display Illumination Control Dimmer Switching preout Built-inAmp Setting Dual Zone System Setting Supreme Setting AMP Control News Bulletin with Timeout Setting Local Seek Tuning Mode AF (Alternative Frequency) Restricting RDS Region (Region Restrict Function) Auto TP Seek Monaural Reception Auxiliary Input Display Setting Selecting Russian Characters Text Scroll Built-inAuxiliary input Setting Power OFF Timer CD Read Setting Audio Preset Memory Audio Preset Recall Firmware version display Demonstration mode Setting Loading and Replacing the battery Basic operations Dual Zone System In Tuner source In Disc/USB source Accessories Installation Procedure If You Want to Connect iPod Page Connector Function Guide 2WARNING Connecting the ISO Connector Installing the Unit Removing the Hard Rubber Frame (escutcheon)