In Standby mode

Built-in Amp Setting

Controlling the built-in amplifier.

Turning OFF this control enhances the preout quality.

Display

Setting

"AMP ON"

The built-in amplifier activates.

"AMP OFF"

The built-in amplifier deactivates.

Other than Standby mode/

When the Dual Zone System is ON

Dual Zone System Setting

Setting the Front channel and Rear channel sound in the Dual Zone System.

Display

Setting

"ZONE2 R"

Sub source (Auxiliary input source) is to be rear

 

channel.

"ZONE2 F"

Sub source (Auxiliary input source) is to be front

 

channel.

In Audio file source

Supreme Setting

When AAC, MP3 or WMA files encoded at a low bit rate (less than 96kbps (fs=44.1k, 48kHz)) are played, this function restores their high frequency region to approach the sound quality of equivalents of these files encoded at a high bit rate. Processing is optimized for the compression format used (AAC, MP3, or WMA), and adjustment is made for the bit rate used.

Display

Setting

"SPRM ON"

Plays sound using the Supreme function.

"SPRM OFF"

Plays the original sound stored in the audio file.

⁄

•The sound effect may be imperceptible depending on the relationship between the audio file format and setting.

•This function is not available on the iPod.

When LX AMP unit connecting

AMP Control

You can control the LX AMP connected to the unit.

1Select AMP Control modePush the Control knob towards up or down. Select the "AMP CTRL" display.2Enter AMP Control mode

Press the Control knob for at least 1 second.

3Select the AMP Control item for adjustment Push the Control knob towards up or down.

⁄

•For the details on the AMP Control item, see the Instruction manual attached to the LX AMP.

4Adjust the AMP Control item

Push the Control knob towards right or left.

5Exit AMP Control mode Press the [MENU] button.

⁄

•You cannot use the LX AMP operation during standby mode.

English 27