This section describes the items which can be controlled with the "SOUND" OSD. (Some items may be uncontrollable depending on the played disc and player status.)
| 1 Dolby |
|
|
| E |
|
|
|
| T I X | |
SOUND | ENG 5.1ch | Off | Off | Off |
1Audio icon: Shows the audio signal, audio language and number of audio channels. Select to switch the audio language. fi
2Virtual Surround icon: Shows the level of the Vir- tual Surround effect. Select to adjust the level of Vir- tual Surround or switch it off.fi
3Cinema voice icon: Shows the on/off status of Cin- ema Voice. Select to switch Cinema Voice on or off.
fi
4Down Mix icon: Shows the on/off status of Down mix. Select to switch Down mix on or off.fl
Switching the audio language
When a VCD or a DVD containing the recording of audio in multiple languages is played, the language used in the voice can be switched over. (The audio language can also be switched directly by pressing the AUDIO button. •)
1.Press ON SCREEN during DVD playback and select the "SOUND" OSD by tilting the joystick up or down.
2. Move the cursor to | 1 Dolby | (Audio icon) |
ENG 5.1ch |
by tilting the joystick to the left or right, then press
ENTER .
3.Select the desired audio language number by tilting the joystick up or down, then press ENTER .
¶With a DVD AUDIO disc, an audio language number can be selected from up to 2 numbers.
¶With a DVD VIDEO disc, an audio language number can be selected from up to 8 numbers.
¶With VCD, "STEREO", "L", "R" or "L+R" can be selected.
¶The default audio language set by the user is selected when the power is turned on or the disc is changed. If the default language is not contained in the disc, the priority language defined for the disc will be played back.
Virtual Surround function
When playing a DVD recorded with Dolby Digital Surround audio, powerful sound can be reproduced even when you use headphones or only two speakers.
1. Press ON SCREEN during DVD playback, and select the
"SOUND" OSD by tilting the joystick up or down.
2. Move the cursor to 
(Virtual Surround icon)
Off
by tilting the joystick to the left or right, then press
ENTER .
¶The icon can be selected only when the played software is recorded in Dolby Digital audio (with 2 or more channels).
3.Select the level of Virtual Surround effect by tilting the joystick up or down, then press ENTER .
| Chapter 4: OSD Operation | |
| The effect is increased when the | |
Off | ||
1 | selected level is higher. Select "Off" | |
2 | to switch the effect Off. To select | |
HP1 | ||
the level of the Virtual Surround | ||
HP2 | ||
| effect through headphones, select | |
| ||
| "HP1" or "HP2". |
¶When a DVD recorded with Dolby Digital audio (with 2 or more channels) is played, the "DOLBY DIGITAL" indicator on the player main unit lights up.
Cinema Voice function
This function to be used when words are hard to be distinguished during playback of DVD recorded with Dolby Digital Surround, Dolby Digital, DTS, or DVD Audio LPCM. To use this function, it is required that the disc being played provides the center channel audio.
÷When the digital output terminal is used, the “Digital Audio” setting should be set to “PCM”
or “Off”. | R |
1. Press ON SCREEN during playback of DVD, then select the
"SOUND" OSD by tilting the joystick up or down.
2. Move the cursor to 
(Cinema Voice icon) by
Off
tilting the joystick to the left or right, then press ENTER .
¶The icon can be selected only when the played software is recorded in Dolby Digital audio (with center channel).
3.Select on or off by tilting the joystick up or down, then press ENTER .
Operation OSD
35