Kenwood DV-5700 Before Start, Preparation of Remote Control Unit, Audio Filter, Equipment of, Filter 110 kHz, Remote control range:, Installing the batteries:

Before Start Remote control range:

Chapter 1: Connection of Equipment

Connection

Do not insert the power cord plugs of the player and the connected components until all of the components have been connected.

Be sure to insert all connection cables securely. If a cable is plugged incompletely, lack of video, lack of audio or noise may result.

Before connecting or disconnecting a connection cord, be sure to unplug the power plug from the wall power outlet. If a connection cable is connected or disconnected while the power plug is left connected, malfunction or equipment damage may result.

When a DVD AUDIO disc is played, the player can output audio signals at very high frequencies. As this may sometimes lead to speaker damage due to a high-volume sound, do not set "Audio Filter" to "Filter 110 kHz" when the speakers in use are not suitable for high-frequency

reproduction.Œ

Also, be sure to check the actual sound level when increasing or decreasing the volume control setting.

If the joystick remote is used outside this area, correct operations will not be possible.

¶When the controllable distance of the joystick remote reduces, replace both batteries with new ones.

¶Do not install the player in a place where the remote control sensor is subjected to direct sunlight or the light of a fluorescent lamp base on high-frequency lighting (inverter system, etc.). Otherwise, the control range of the joystick remote will be reduced.

Equipment of

Preparation of Remote Control UnitInstalling the batteries:

Open the cover and insert the batteries (R6/AA) by observing the polarity marking.

\

9