SET UP
1
"IPB Display" Setting

With the MPEG2 which is one of the video display methods of DVD, each picture is divided into the following three picture types before being coded in digital signal.

I-picture (in-frame coding): This is the standard video

and can constitute a picture by itself. As the highest picture quality can be obtained, the still image of I- picture is most suitable for use when adjusting the picture quality.

P-picture (forward prediction coding): Picture cal-

culated based on past pictures (I-picture or P-picture).

B-picture (bidirectional prediction coding): Picture

calculated by comparing the previous and next pictures (I-pictures or P-pictures). This picture type contains least amount of video information.

When IPB Display is set to "On", the I, P or B type of DVD still picture is displayed on the TV screen to help identify whether the picture is I-picture, P-picture or B- picture. This makes it possible to find the I-picture which is the standard video containing most amount of information.

At the factory, the player has been set to "Off" with which the IPB display is not shown.

Setting items

"" : Select to return to the previous screen.

"On" : Select to view the IPB display.

"Off" : Select to not to view the IPB display.

Operation procedure

1.Set the mode switch of the joystick remote to the Purple position.

2. While the player is in stop mode, press to display the "MAIN" menu of "SET UP MENU".

3.Press ENTER to open the setup screen.

4.In the setup menu, select "IPB Display" by tilting the joystick up or down and press ENTER .

Rating

7

 

 

 

 

TV Aspect

7 On

TV Mode

7 Off

TV Monitor Type

 

 

 

DVD VIDEO Mode

 

 

 

OSD Position

 

 

 

On Screen Message

 

 

 

IPB Display

 

 

 

 

 

 

 

5.Select "On" or "Off" by tilting the joystick up or down, then press ENTER to enter the selection in memory.

Chapter 6: Various Setups

Setups Various

53