Operation procedure
1.Set the mode switch of the joystick remote to the Purple position.
2. While the player is in stop mode, press 
and tilt the joystick up or down to display the "SOUND" menu of "SET UP MENU".
3.Press ENTER to open the setup menu.
4.In the setup menu, select "Digital Audio Dolby
Digital" by tilting the joystick up or down and press
ENTER .
Digital Audio | 7 |
|
PCM Down Conversion | 7 | Bitstream |
Dolby Digital | 7 | PCM |
DTS
MPEG
Speaker Setting (Custom)
Speaker Setting (Quick)
Audio During Search
Dynamic Range Control
Audio Filter
5.Select the audio output by tilting the joystick up or down, and press ENTER to enter the selection in memory.
When a DVD or
At the factory, the player has been set to "Bitstream" to enable digital connection to an AV amplifier with builtin DTS decoder. For the nonexistent decoders, set the "Digital Audio" setting to "PCM".
Setting items
"
" : Select to return to the previous screen.
"Bitstream" : The signal is output as a bitstream. Select when connecting a component containing DTS decoder.
"PCM" : The signal is converted onto 48 kHz (2CH.) PCM signal before being output. Select when connecting a component without DTS decoder.
Operation procedure
1.Set the mode switch of the joystick remote to the Purple position.
2. While the player is in stop mode, press | 1 | and tilt |
SET UP |
the joystick up or down to display the "SOUND"
menu of "SET UP MENU".
3.Press ENTER to open the setup screen.
4.In the setup menu, select "Digital Audio DTS" by tilting the joystick up or down and press ENTER .
Chapter 6: Various Setups
Digital Audio | 7 |
|
PCM Down Conversion | 7 | Bitstream |
Dolby Digital | 7 | PCM |
DTS |
|
|
MPEG
Speaker Setting (Custom)
Speaker Setting (Quick)
Audio During Search
Dynamic Range Control
Audio Filter
5.Select the audio output by tilting the joystick up or down, and press ENTER to enter the selection in memory.
Setups Various
55