hints
●Use fresh ingredients
●Don’t cut food too small. Fill the width of the large feed tube fairly full. This prevents the food from slipping sideways during processing. Alternatively use the small feed tube.
●When using the chipper disc, place ingredients horizontally.
●When slicing or shredding: food placed upright 
comes out shorter than food placed horizontally 
.
●There will always be a small amount of waste on the plate or in the bowl after processing.
multi | pro | multi | pro |
citrus press
Use the citrus press to squeeze the juice from citrus fruits (eg oranges, lemons, limes and grapefruits).
cone sieve
to use the citrus press
1Fit the drive shaft and bowl onto the power unit.
2Fit the sieve into the bowl -
ensuring the sieve handle is locked into position directly over the bowl handle 
.
3Place the cone over the drive shaft turning until it drops all
the way down 
.
4Cut the fruit in half. Then switch on and press the fruit onto the cone.
●The citrus press will not operate if the sieve is not
locked correctly.
mill
Use the mill for milling herbs, nuts and coffee beans.
blade unit sealing ring jar sprinkler lid
safety
●Never fit the blade unit to your machine without the jar fitted.
●Never unscrew the jar while the mill is fitted to your machine.
●Don’t touch the sharp blades. Keep the blade unit away from children.
●Never remove the mill until the blades have
completely stopped.
important
● To ensure long life of your mill, never run for longer than 30 seconds. Switch off as soon as you’ve got the right consistency.
●Don’t process spices - they may damage the plastic.
●The machine won’t work if the mill is fitted incorrectly.
●Use for dry ingredients only.
to use your mill
1Put your ingredients into the jar. Fill it no more than half full.
2 | Fit the sealing ring into the blade |
| |
| unit. |
|
|
3 | Turn the blade unit upside down. |
| |
| Lower it into the jar, blades down. |
| |
4 | Screw the blade unit onto the jar |
| |
| until it is finger tight. |
|
|
5 | Place the mill onto the power unit | multipro | |
| and turn to lock | . |
|
6Switch on to maximum speed or use the pulse control.
7After milling, you can replace the blade unit with the sprinkler lid and shake out your food.
●The sprinkler lid is not airtight. hints
●Herbs are best milled when clean and dry.
5
