Kenwood FP710 Mini processor bowl, To use the mini processor bowl, Kenstore attachments carousel

mini processor bowl

Use the mini processor bowl to chop herbs and process small quantities of ingredients e.g. meat, onion, nuts, mayonnaise, vegetables, purées, sauces and baby food.

mini processor knife blade mini processor bowl

to use the mini processor bowl

1	Fit the drive shaft and bowl onto
	the power unit.
2	Fit the mini processor bowl -
	ensuring the ribs on the inside
	of the mini bowl chimney align
	with the slots in the main bowl
	chimney	.
3	Place the knife blade over the
	drive shaft	.
4	Add the ingredients to be
	processed.	multi	pro
5	Fit the lid and switch on.

safety

●Never remove the lid until the knife blade has completely stopped.

●The knife blade is very sharp - always handle with care. important

●Don’t process spices – they may damage the plastic.

●Don’t process hard food such as coffee beans, ice cubes or chocolate – they may damage the blade.

hints

●Herbs are best chopped when clean and dry.

●Always add a little liquid when blending cooked ingredients to make baby food.

●Cut foods such as meat, bread, vegetables into cubes approximately 1-2 cm (1⁄2 – 3⁄4 in) before processing.

●When making mayonnaise add the oil down the feed tube.

KENSTORE™ attachments carousel

Your food processor is supplied with an attachment storage carousel that fits inside the bowl.

to use the storage carousel

1Fit the knife blade to the bowl.

2Then fit the whisk, discs and canopy into the carousel .

3Fit the carousel over the knife blade and place the processor lid on top .

multi pro

care & cleaning

●Always switch off and unplug before cleaning.

●Handle the blades and cutting discs with care - they are extremely sharp.

●Some foods may discolour the plastic. This is perfectly normal and won’t harm the plastic or affect the flavour of your food. Rub with a cloth dipped in vegetable oil to remove the discolouration.

power unit

●Wipe with a damp cloth, then dry. Ensure that the interlock area is clear of food debris.

●Store excess cord in the storage

area at the back of the machine .

liquidiser/mill

1Empty the jug/jar before unscrewing it from the blade unit.

2Wash the jug/jar by hand.

3Remove and wash the seals.

4Don’t touch the sharp blades – brush them clean using hot soapy water, then rinse thoroughly under the tap. Don’t immerse the blade unit in water.

5Leave to dry upside down.

6