Recording on tape 25

 

menu

3. Set the recording condition.

 

 

 

 

 

 

 

up

Select the reverse mode. (

 

 

 

 

 

 

volume/ multi control

÷ The tape equalizer is defeated during recording.

down

 

 

set/demo

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Select an input source other

4. Select the source to be recorded.

 

 

 

than “TAPE”

CD

01

0:00

 

 

 

 

 

 

 

 

 

 

Example:

 

TUNER (Broadcasts)

 

 

 

To select the CD input

 

AUX (External input)

CD

 

 

 

 

 

 

CD

"Adjusting the AUX input level"‡

 

The character information

6display shows the recording input source.

4

÷If a CD has already been loaded, it starts to play now. Press the 7STOP key

 

to stop it.

 

 

 

 

TAPE rec

5. Start recording.

 

1Press the TAPE rec key.

5

2Play (or tune) the input source to be recorded.

÷Recording stops automatically when the tape side(s) to be recorded have

 

 

been fully recorded.

Pause the recording

Points in CD recording

section Basic

Blinks

TAPE rec

TAPE

REC

÷Press the TAPE rec key during recording. It stops after leaving a non-recorded blank of 4 seconds. (Press the key again to resume recording.)

Stop the recording

STOP

7

When recording CD tracks onto a tape, if you leave the cassette deck in record-pause mode beforehand, the cassette deck recording can be started at the CD starts to be played.

1Put the CD player in pause mode.

2Select the track to be recorded with the

4or ¢key.

(The CD player pauses at the beginning of the selected track.)

3Put the cassette deck in Record-pause

mode.

(Press TAPE rec key twice)

4Start playing the CD. (Recording starts)

÷To stop recording, press the 7STOP key.

Note that this cassette deck cannot record onto Note Metal tapes.

Do not use a cassette with more than 90-minute recording time, for the tape used with such a cassette is very thin and tends to cause troubles such as entanglement around the pinch roller or cutting of tape.