26Various CD playback features

Listening in the desired sequence (program playback)

Use the following procedure to program desired tracks in a desired order. (up to 32 tracks)

Select the CD input.
1Let the “PGM” indicator light.

Lights

 

 

 

Press in stop mode

PGM

 

 

 

PGM

--

P-01

 

 

AUTO/MONO

 

 

2Select track numbers in the order you want to play them.

1Select the track.

2Confirm the selection.

SET

(To select more than one track, repeat steps 1 and 2 for each track.)

 

 

Program position of the track

Selection of tracks

to be selected next.

PGM

 

 

 

 

 

 

 

05

P-01

Press the numeric keys as shown below....

To select track No. 23

: 003

To select track No. 40

: 0000)

÷A track can also be selected using the 4 or ¢ key.

÷Up to 32 tracks can be programmed. When “PROGRAM FULL” is displayed, no more tracks can be programmed.

÷If you made a mistake, press the CLEAR key and enter the track No. again.

÷When a track No. is entered, the track will be added to the end of the existing program.

÷“– – : – –”is displayed when the total programmed period has attained 100 minutes or more.

Application section

3Start playback.

CD/

÷Tracks will be played in the order they were programmed (following the program numbers).

÷When the 4 or ¢ key is pressed during play, the program will jump to the preceding or the following track respectively.

÷When the 4key is pressed once during playback, the play position returns to the beginning of the current track being played.

To stop playback

To quit the program mode

Clearing tracks from the end

Press in stop mode

CLEAR

STOP

-- P-05

CLEAR

(P-5 has been deleted.)

÷ Each time the key is pressed, the last track in the program is cleared.

Clearing the program

Press in stop mode

PGM

AUTO/MONO

÷The entire program is cleared.