34

Convenient Recording Methods

One-touch edit recording (CD=TAPE)

Records all tracks in a CD with a simple operation. (All-track recording)

Records a single CD track being played from the beginning. (Single-track recording)

Be sure to put the cassette deck in stop mode
1Make the preparations for recording.

1Perform steps 1 to 3 of the procedure in

”Recording on tape”.

¢

2Insert disc in the CD player.

2Check the current play mode of the CD player.

All-track recording

Single-track recording

If it is in play mode, stop it.

STOP

Select the desired CD track and play it.

To record other tracks, repeat steps 2 and

3for each track.

3Start recording.

TAPE O.T.E.

÷When the TAPE O.T.E. key is pressed for ”Single-track recording”, the CD track being played is replayed from the beginning and recording start at the same time.

÷Operation is also possible with the o.t.e. key of the main unit.

Application section

To interrupt a recording

STOP

(Recording and playback will be stopped.)

At the end of the recording

Cassette deck : Stop is executed after an unrecorded portion of about 4 sec. has been produced.

Note that this cassette deck cannot record onto Note Metal tapes.