Manuals / Brands / Home Audio / Stereo System / Kenwood / Home Audio / Stereo System

Kenwood HM-332 38Clock adjustment, 1Activate the clock adjustment mode, 2Enter the figure of hour, 3Enter the figure of minute, Set it, 2Set it, 2Set it

1 48

Download 48 pages, 1.4 Mb

38Clock adjustment

As the clock is not used to show the time of the day but is also used in timer operations, be sure to set the clock in advance.

1Activate the clock adjustment mode.

Press and hold for more than 2 sec. when the power is ON.

menu

2Enter the figure of hour.

1Enter the figure of hour.

	up
volume/
multi control
down
To decrease	To increase
hour	hour
2Set it.
	set/demo

3Enter the figure of minute.

section	1Enter the figure of minute.
Application	up
	volume/
	multi control
	down
	To decrease	To increase
	minute	minute

2Set it.

set/demo

TIME ADJUST 12:00am

÷The time display starts to blink.

Example: Adjustment to 8:07

TIME ADJUST 8:00am

÷The time of the day is represented in 12-hour am/pm method.

÷Press the set/demo key. The hour is entered and the minute display starts to blink.

Example: Adjustment to 8:07

TIME ADJUST 8:07am

÷If you make a mistake, restart from the beginning.

÷When the time of day has been set by pressing the set/ demo key, the display shows “COMPLETE”.

÷After a power failure or the power cord has been un- plugged then plugged in again, it is required to set the time again.

÷When the 7STOP key is pressed while the power is in the standby mode, the time of the day will be displayed for 5 seconds.

Contents

Page Before applying power Safety precautions The marking of products using lasers (Except for some areas) Contents Application section R.D.S. (Radio Data System) Knowledge section Page Special features CD text information display Convenient recording features Convenient timer features Unpacking 6System connection CAUTION AM loop antenna Malfunction of microcomputer Speaker (Right) FM indoor antenna FM indoor antenna Speaker (Left) POWER cord Connection of other accessories (Commercially available parts) FM outdoor antenna Controls and indicators Display Display panel control AUTO POWER SAVE function Main unit About the one-touchoperation function In regard to demonstration * About the volume/multi control knob 12Operation of remote control unit Loading batteries Operation In regard to the DISPLAY key 14Basic use method 1.Set the POWER ( )key to ON 2. Selecting the desired output 3. Volume adjustment Listening through headphones Standby mode 16Playback of CD 1.Load a disc 2. Start playback In regard to CD-TEXT Skipping tracks To fast forward and backward To pause playback Eject the CD Time display on CD player 18Playback of tape 1. Load a cassette tape 2.Start playback To wind tape at high speed Selection of TAPE equalizer (TAPE EQ.) Selection of reverse mode (Main unit only) 20Receiving broadcast station 1.Press the tuner/band key 3. Tuning (Preset Call) One-by-onepresetting (manual preset) Collective presetting of stations (auto preset) Channel space setting Page 24Recording on tape 1.Load a tape in deck 2.Select the tape transport direction 4. Select the source to be recorded 5. Start recording Pause the recording Stop the recording 26Various CD playback features Listening in the desired sequence (program playback) 1Let the “PGM” indicator light 2Select track numbers in the order you want to play them 3Start playback Repeated playback Setup for repeating a single track Setup for repeating all tracks in a disc Setup for repeating selected tracks To stop repeated playback 2Press the RANDOM key To cancel random playback R.D.S. (Radio Data System) (Except for some areas) This unit is equipped with the following functions utilizing RDS data : Searching for a desired program type (PTY search) 1Select the PTY search mode 2Select the desired program type 3Start the search To change to a different program type : Page Convenient recording methods Selection of the recording type Program recording (CD=TAPE) One-touchedit recording (CD=TAPE) 1Make the preparations for recording 2Check the current play mode of the CD player 3Start recording To interrupt a recording Program recording (CD =TAPE) 2Programtracks. the desired sequence of CD 36Tone adjustment Tone adjustment Balance adjustment (Adjust for the desired left / right balance.) Balance adjustment 1Select “BALANCE ?” Listening to an AUX input source Listening to an AUX input source 1Select AUX (external input) 2Play the connected equipment 3Adjust the volume 38Clock adjustment 1Activate the clock adjustment mode 2Enter the figure of hour 3Enter the figure of minute Timer operation Setting the O.T.T. timer 1Make preparations for the play (recording) 2Select the timer number 3Set the ON time then the OFF time 4Make the desired reservation 5Reserve the timer operation 6Put the unit in standby mode When timer operation is not required Sleep timer (SLEEP) To cancel Important Items Maintenance Cleaning the head section WARNING NOTICE: Reference Disc handling precautions Discs which can be played with this unit Never play a cracked or warped disc Disc accessories In case of difficulty Operation to reset Amplifier section/Speakers Tuner section CD player section Remote control unit Cassette deck Specifications Main unit Speakers For your records