8 | System connection |
|
Connection of other accessories (Commercially available parts)
CAUTION Note on Connection
Connect the components as shown in the diagram. Only plug the power cord into a power outlet once connections are completed.
Preparation section
Optical fiber cable
DIGITAL OUT
OPTICAL
cap
DIGITAL OUT jack (OPTICAL)
The DIGITAL OUT jack (OPTICAL) outputs the CD signal.
The CD signal can be recorded in digital format by connecting a recorder to the DIGITAL IN jack (OPTICAL).
If necessary, remove the cap and plug the optical fiber cable (optical)
FM outdoor antenna
Lead the 75Ω coaxial cable connected to the FM outdoor antenna into the room and connect it to the FM 75Ω terminal. Please remove the indoor antenna after an outdoor antenna has been in- stalled.
|
| ANTENNA |
|
|
| AM |
|
|
| GND |
|
|
| FM |
|
|
| 75Ω |
|
| L | ||
|
|
| |
L | A U X |
| + |
I N |
| ||
A U X | R |
|
|
|
|
| |
I N |
|
| - |
R |
|
| |
|
|
| |
|
| R | L |
DIGITAL OUT
OPTICAL
Audio cord
Antenna adaptor (optional)
Audio output
POWER cord
TO WALL AC OUTLET
VCR, Analog turntable with
MD recorder or DAT etc.
1.In case an associated system component is connected, also read the instruction manual of the component.
Notes 2.Be sure to insert all connection cords securely. If their connections are imperfect, the sound may not be produced or noise may interfere.
3.Before plugging or unplugging a connection cord, be sure to unplug the power cord from the wall AC outlet. If connection cords are plugged or unplugged with the power cord left plugged in, malfunction or damage may result.