40
Recording on MD
Selecting the recording input signal (REC INPUT)With recording of CD playback, either the digital output or analog output can be recorded as required. (In recording of a disc source other than CD on MD, the recording source is set automatically to the "ANALOG" audio.)
1Press the DVD/CD 6 key
2Press the MODE key
3Turn the VOLUME/MULTI CONTROL knob to select "REC INPUT", then press the SET/DEMO key.
4Turn the VOLUME/MULTI CONTROL knob to select "DIGITAL" or "ANALOG", then press the SET/ DEMO key.
R E C I N P U T
REC INPUTindicator
DIGITAL
D I G I T A L
section
The level for recording the digital input signal from an auxiliary source component such as a satellite tuner or MD recorder can be adjusted.
(The recording level of the audio selected in "Selecting the recording input signal (REC INPUT)" can be adjusted.)
Basic
1Press the MODE key
2Turn the VOLUME/MULTI CONTROL knob to select "REC LEVEL", then press the SET/ DEMO key.
3Adjust the recording level
4Press the SET/DEMO key to set the selection.
R E C L E V E L
Input level
Level+value1
Adjust so that these segments light at times.