3Start recording.

1Press the MODE key.

MODE

2Turn the VOLUME/MULTI CONTROL knob to select "O.T.E. MODE", then press the SET/DEMO key.

Convenient recording methods

65

3Turn the VOLUME/MULTI CONTROL knob to select "NORMAL SP" or "HIGH SP", then press the SET/DEMO key.

If you are operating the remote, press the O.T.E. key. (Only "NORMAL SP" recording is available from the remote control unit.)

The recorded audio may skip, noise may be recorded on the MD or unnecessary tracks may be created depending on the condition of the CD. In such a case, restart recording at the normal speed.

To interrupt a recording

STOP 7

TUNING MODE

(Recording and playback will be stopped)

Turning the knob switches the display contents.

1 "NORMAL SP" : Normal-speed recording

2"HIGH SP" : High-speed recording

÷After the track has been recorded, the MD recorder stops and the DVD/CD player enters pause mode.

÷When either the playback of CD (MP3, VCD) or record- ing of MD is stopped, the other operation is stopped automatically.

With certain tracks, when a track has been recorded

 

 

in high-speed recording, the recording mechanism

 

 

prohibits to start high-speed recording of the same

 

 

track or high-speed recording of the disc containing

 

 

the track in less than 74 minutes after the start of pre-

 

 

vious recording. In this case, the unit displays the time

 

 

required till the high-speed recording can be re-

 

Application

started.

 

 

 

 

 

W a i t

7 4 m i n .

 

section

after its high-speed recording, record it in nor-

 

If you want to record the same track immediately

 

 

mal-speed recording.

 

 

 

 

 

 

 

Do not turn power off or apply shock or impact while "WRITING" is displayed. If the power cord is unplugged before "WRITING" disappears, the recorded or edited data will be lost.