92

5Reserve the timer operation.

Turn the VOLUME/MULTI CONTROL knob to select "ON", then press the SET/ DEMO key.

VOLUME/

MULTI CONTROL

SET/DEMO

\

6Adjust the volume.7Put the unit in standby mode.

(When the unit enters the Standby mode, the STANDBY/TIMER indicator lights in amber.)

Timer operation

P R O G . 1 > O N

÷When the timer setting is completed by pressing the SET/DEMO key, "COMPLETE" is displayed.

÷Use the same procedure as above when you want to reserve a program timer operation in PROG.2.

÷If there is a power failure or the power cord is un- plugged after the timer reservation has been activated, the STANDBY/TIMER indicator blinks in amber. In this case, the clock setting should be restarted from the beginning.

After setting the timer, make sure that the power is set to OFF (Standby).

Application section

When timer operation is not required

When power is ON, press the TIMER key to turn off the timer-related indicators completely.

Each press switches the timer as follows.

1 O.T.T.

TIMER2 1

3 1 2

4 1 2

5Extinguished

÷The reservation contents are held in memory.

To set the same timer program again

When power is ON, press the TIMER key to turn on the timer-related indicators completely.

Each press switches the timer as follows.

1 O.T.T.

TIMER2 1

3 1 2

4 1 2

5Extinguished

÷Be sure to load a disc and adjust the listening vol- ume.

To check or modify the reservation contents, restart the timer reservation from the beginning.