Eject | Kenwood KDC-D301 guide

English

Troubleshooting Guide

The following messages are displayed on the centre unit when certain problems are occurring in your system. Take the recommended actions.

E-01	No CD in the unit.
EJECT	]Insert the CD.
NO PANEL	The faceplate of this unit has been removed.
E-30	]Replace it.
E-04	The CD is quite dirty. The CD is upside-down. The CD is scratched a lot.
	]Clean the CD and load it correctly.
E-99	The unit is malfunctioning for some reason.
Mecha Error	]Press the reset button on the centre unit. If the "E- 99"/"Mecha Error" code does not disappear, consult your nearest service
	centre.
E-0d	The protective circuit in the unit activates when the temperature inside the CD player exceeds 60°C (140°F), stopping all operation.
HOLD	]Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F), the
	disc will start playing again.

— 14 —

Image 14

Kenwood KDC-D301 instruction manual Eject

Contents

KDC-D301 Contents 2Warning Do Not Load 3-in. CDs in the CD slot Safety precautionsTo prevent injury or fire, take the following precautions Handling Compact discs Cleaning the Faceplate Terminals Cleaning the CD SlotMarking of products using lasers Except for some areas Lens Fogging Storing CDs Cleaning CDsDo Not Load CD Accessories Checking New CDs for Burrs Playing CDs OperationsButtons and Display Switching Spectrum Analyzer Display Presetting Disc Names Theft Deterrent Faceplate Display Level AdjustmentEject Accessories External view Number of items Installation Procedure Connections Screwing the Faceplate on the Unit area only InstallationInstallation Removing the hard rubber frame Removing the Unit Troubleshooting Guide Problem Possible Cause Solution Eject Specifications CD player section General