Tuner Operation
Function of remote control
Direct Access Tuning
Entering the frequency and tuning.
1Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote control.
"- - -
2Enter the frequency
Press the number buttons on the remote control.
Example:
~,',..~%,'," ••~'•• ",'l $ i"" ", . ',"","
_
92.1 MHz (FM) | [0], [9], [2], [1] |
810 kHz (AM) | [0], [8], [1], [0] |
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote control.
Q
~
•You can enter the FM band frequency in steps of a minimum of 0.1 MHz.
Function of KDC-MP40BU
Frequency Step Setting
Changing the tuning frequency step.
The original setting is FM band 50 kHz.
1Turn the power OFF
Press the [SRC] button for at least 1 second.
2 Switch the frequency step
While pressing the [1] and [5] buttons, press the [SRC] button.
Release your fingers from the bunon after the display appears.
The frequency step changes to FM band 200 kHz.
@2
•When the same operation is repeated, the frequency step returns to the original setting.
•When the frequency step is changed. the frequencies in the memory are deleted.
English I 9