Kenwood KDC-MP438U, KDC-MP338 Menu Operation, r.tm3, Gied, Menu System, Activating Security Code

Menu Operation

Menu System				source to which the item is displayed.
				(]iJ: Can be set in other than standby state.
Set up the following functions;				m :Can be set in standby state.
				.. :Can be set while Audio file source of CD/USB
"SECURITY	Referto				(excluding iPod).
				liD: Can be set during FM reception.
SET"/	page 12			Em: Can be set during Satellite radio source.
"SECURITY
				r.tm3 :Can be set while accessing AUX source.
CLR"
			m	GIED: Can be set while HD Radio source.
"CLOCK	Refer to	Sets the clock,
					- :Can be set during all sources.
ADJUST"	page 13			1 Enter Menu mode
"DISPLAY"	ON*/OFF	Turns off the display when no
				Press the [MJOG] button for at least 1 second.
		operation is performed,	m
"DIMMER"	AUTO*/OFF	Dims the display in conjunction		"MENU" is displayed.
*1,2,3		with the light switch of the		2 Select the menu item
		vehicle.		Push the Control knob towards up or down.
"DIMMER"*4	ON/OFF*	Adjusts the brightness of
				3 Set the menu item
		the display according to the
		surrounding illumination,	m	Push the Control knob towards right or left.
"DOT LINE"	OW/OFF	Specifies whether to display the		4 Exit Menu mode
		red dotted line on the display.	m	Press the [MJOG] button.
"SWPRE"*1.4	REAR*/	Sets the preout output.
				~
	SUB-W		m
"AMP"*1,2	OW/OFF	Turns on/off the built-in amplifier.		• Refer to the respective page for information on how to
					set the items with reference page number.
"AMS	Refer to	Controls the connected LX
				•	"ZONE2"is displayed when "2Z0NE"in <Audio Setup>
CONTROl"*1	page 13	amplifier.
					(page 7) is set to "ON.
"ZONE2"*1,2,J	REAR*/	Specifies the destination of AUX	(]iJ
				•	Refer to the <Appendix> (page 16) for the details of the
	FRONT	input sound when the Dual Zone			menu items,
		function is turned on.
				• Strong electrical fields (such as from power lines) may
"SUPREME"
	OW/OFF	Turns ON/OFF the Supreme			cause unstable sound quality when CRSC is turned ON.
		function.	liD		In such asituation, turn it OFF.
"CRSC'	OFF/ON*	Switches to Monaural to decrease
		noise when reception is poor.
"NAME SET"	Refer to	Sets the display when switched	r.tm3	Activating Security Code
	page 14	to AUX source,
"SCROll"	AUTO*/	Specifies whether the text is
	MANUAL	scrolled automatically.		• You can set the Security Code with a 4 digit number of your
"RECEIVE	Refer to	Sets the receive mode of HR radio.	GIED
				choice.
MODE"	page 14
				• The Security Code cannot be displayed or referenced, Make
"ESN"		Displays the Electronic Serial
				a note of the Security Code and treasure it up,
		Number of satellite radio.	m
				1 Select Security Code item during Menu mode
"AUX"	-OF-F/O-N-1*-/ Sets whether to display AUX
	ON2	during source selection.	m	Select the "SECURITY SET'display.
-"C-D-R-EA-D-"-	1*/2	Sets the CD read mode,		For how to select menu items, refer to <Menu
"DEMO	Refer to	Specifies whether to enable		System>(page 12).
MODE"	page 14	demonstration.		2 Enter Security Code mode
*Factory setting				Press the Control knob for at least 1 second.
*1 Function of KDC-X492.				When "ENTER" is displayed, "CODE" is also displayed.
*2 Function of KDC-MP438U.				3 Select the digits to enter
*3 Function of KDC-MP408U.				Push the Control knob towards right or left.
*4 Function of KDC-MP338.
Displayed item is depending on currently selected				4 Select the Security Code numbers
source, The mark in Source column shows the					Push the Control knob towards up or down.

12I KDC-X492/KDC-MP438U/KDC-MP408U/KDC-MP338