ZyXEL Communications P-2302HW manual Using syslog, Prestige Setup, UNIX Setup

Prestige 2302 Support Notes

Using syslog

4.Prestige Setup

Configuration:

1.Active: Select this check box to enable syslog logging.

2.Syslog IP Address: Enter the IP address of the syslog server that you wish to send the syslog.

3.Log Facility: Select a log location (numbered 1 to 7).

•UNIX Setup

1.Make sure that you start syslogd with the -rargument.

-rallows the syslog facility to receive messages from the network using an Internet domain socket with the syslog services. The default setting is NOT enabled.

2.Add the following commands at the end of the /etc/syslog.conf file.

local1.*/var/log/zyxel.log

Where /var/log/zyxel.log is the full path of the log file.

3. Restart syslogd.

•CDR log(call messages)

Format:

sdcmdSyslogSend( SYSLOG_CDR, SYSLOG_INFO, String ); String = board xx line xx channel xx, call xx, str

board = the hardware board ID

49

All contents copyright (c) 2005 ZyXEL Communications Corporation.