Prestige 2302 Support Notes
Menu 11.1:
Menu 11.1 - Remote Node Profile
Rem Node Name= LAN | Route= | IP |
Active= Yes | Bridge= No | |
Encapsulation= PPP | Edit PPP Options= No | |
Incoming: | Rem IP | Addr= ? |
Rem Login= test | Edit IP/IPX/Bridge= No | |
Rem Password= ******** |
|
|
Outgoing: | Session Options: | |
My Login= testt | Edit | Filter Sets= Yes |
My Password= ***** |
|
|
Authen= CHAP/PAP |
|
|
Press ENTER to Confirm or ESC | to Cancel: | |
Menu 11.5:
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters= device filters= Output Filter Sets: protocol filters= device filters=
The SMT does not allow you to apply a protocol filter set (configured in menu 21) to the device filters field in menu 3.1 or 11.5. Likewise, you cannot apply a device filter in the protocols filters field. However, the SMT cannot detect whether you have configured device and protocol filter rules in the same filter set. This was
22
All contents copyright (c) 2005 ZyXEL Communications Corporation.
