ZyXEL Communications P-2302HW manual VoIP Application Notes, SIP Account Setup

Prestige 2302 Support Notes

Example 2:

To make a phone call over PSTN and SIP networks, enter the pin code if required. PSTN initiates the call and forwards it to SIP.

VoIP Application Notes

SIP Account Setup

VoIP is the sending of voice signals over the Internet Protocol. This allows you to make phone calls and send faxes over the Internet at a fraction of the cost of using the traditional circuit-switched telephone network.

Session Initiation Protocol (SIP) is an application-layer control (signaling) protocol that handles the setting up, altering and tearing down of voice and multimedia sessions over the Internet. SIP signaling is separate from the media for which it handles sessions. The media that is exchanged during the session can use a different path from that of the signaling. SIP handles telephone calls and can interface with traditional circuit-switched telephone networks.

The Prestige supports up to two SIP accounts simultaneously. Follow the procedure below to configure SIP accounts on the device.

Note: You should have a voice account already set up and have VoIP information from your VoIP service provider prior to configuring a SIP account on the Prestige.

71

All contents copyright (c) 2005 ZyXEL Communications Corporation.