Tuner Operation | Other Functions |
|
|
Frequency Step Setting
Changing the tuning frequency step.
The original setting is FM band 50 kHz, and AM band 9 kHz.
1Turn the power OFFPress the [SRC] button for at least 1 second.2Switch the frequency stepWhile pressing the [1] and [5] buttons, press the [SRC] button.Release your fingers from the button after the display appears.
The frequency step changes to FM band 200 kHz, and AM band 10 kHz.
⁄
•When the same operation is repeated, the frequency step returns to the original setting.
•When the frequency step is changed, the frequencies in the memory are deleted.
Activating Security Code
When Security Code is set, possibility of theft is reduced because input of Security Code is prompted to turn on the unit once it is turned off.
⁄
•You can set the Security Code with a 4 digit number of your choice.
•The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up.
1Select StandbyPress the [SRC] button. Select the “STANDBY” display.
2Enter Menu mode
Press the Search button for at least 1 second. “MENU” is displayed.
3Select Security Code mode Press the [FM+] or
Press the [AUD] knob for at least 1 second. When “ENTER” is displayed, “CODE” is also displayed.
5Enter Security CodeOperation type |
| Operation |
Select the digits to enter |
| Press the [4] or [¢] button. |
Select the Security Code |
| Press the [FM+] or |
numbers |
|
|
Press the [AUD] knob for at least 3 seconds. When
“APPROVED” is displayed.
The Security Code function activates.
⁄
•If you enter the wrong Code in steps 5 through 6, repeat from step 5.
•When the Security Code function is activated, “CODE SET” changes to “CODE CLR”.
•To deactivate the Security Code function, see the next section <Deactivating Security Code>.
8Exit Security Code mode Press the Search button.
10