Appendix

About Audio file

•Playable Audio file MP3 (.mp3), WMA (.wma)

•Playable disc media CD-R/RW/ROM

•Playable disc file format

ISO 9660 Level 1/2, Joliet, Romeo, Long file name.

•Playable USB device USB mass storage class

•Playable USB device file system FAT16, FAT32

•iPod Playable Model KDC-MP5043U/ MP543U

Although the audio files are complied with the standards listed above, the play maybe impossible depending on the types or conditions of media or device.

• Playing order of the Audio file

In the example of folder/file tree shown below, the files are played in the order from ① to ⑩.

CD () <<: Folder v vv: Audio file



 v

v

 v  v

v.

An online manual about audio files is put on the site, www.kenwood.com/audiofile/. On this online manual, detailed information and notes which are not written in this manual are provided. Make sure to read through the online manual as well.

⁄

About USB device

•If you start playback after connecting the iPod, the music that has been played by the iPod is played first.

In this case, “RESUMING” is displayed without displaying a folder name, etc. Changing the browse item will display a correct title, etc.

•You cannot operate iPod if “KENWOOD” or “✓” is displayed on iPod.

•When the USB device is connected to this unit, it can be charged up provided that this unit is powered.

•Install the USB device in the place where it will not prevent you from driving your vehicle properly.

•You cannot connect a USB device via a USB hub and Multi Card Reader.

•Take backups of the audio files used with this unit. The files can be erased depending on the operating conditions of the USB device.

We shall have no compensation for any damage arising out of erasure of the stored data.

•No USB device comes with this unit. You need to purchase a commercially available USB device.

•When connecting the USB device, usage of the CA- U1EX (option) is recommended.

Normal playback is not guaranteed when a cable other than the USB compatible cable is used. Connecting a cable whose total length is longer than 5 m can result in abnormal playback.

For operating KCA-BT200 (Optional)

For operation refer to Model-A-1 in the Instruction Manual of KCA-BT200, and the table below. The [AUTO]/[TI] button should be replaced with [SRC] button for <Answering the Waiting Call after Terminating the Current Call>.

•In this manual, the word “USB device” is used for flash memories and digital audio players which have USB terminals.

•The word “iPod” appearing in this manual indicates the iPod connected with the iPod connection cable* (optional accessory).

* Not supported model KCA-iP500.

Refer to the web site for connectable iPod and iPod connection cable.

www.kenwood.com/ipod/kca_ip/

Notation used in the KCA-BT200 Instruction Manual

[38] button

Control knob

[AUTO]/[TI] button

Control knob towards up or down

Control knob towards left or right

Operation

[AUD] knob

[AUD] knob

[DISP] button

[FM+] or [AM–] button

[4] or [¢] button

14 KDC-MP5043U/ KDC-MP543U/ KDC-MP443U