Entering Security Code

The Security Code is required to use the audio unit when the unit is first used after removed from the battery power source or the Reset button is pressed.

1Turn the power ON.2Do the step 5 through 6 operation, and enter the Security Code.

“APPROVED” is displayed. Now, you can use the unit.

Deactivating Security Code

To deactivate the Security Code function.

1Select Standby

Press the [SRC] button. Select the “STANDBY” display.

2Enter Menu mode

Press the Search button for at least 1 second. “MENU” is displayed.

3Select Security Code mode Press the [FM+] or [AM–] button. Select the “CODE CLR” display.

4Enter Security Code mode

Press the [AUD] knob for at least 1 second. When “ENTER” is displayed, “CODE CLR” is also displayed.

5Enter Security Code

Operation type

 

Operation

Select the digits to enter

 

Press the [4] or [¢] button.

Select the Security Code

 

Press the [FM+] or [AM–] button.

numbers

 

 

6Press the [AUD] knob for at least 3 seconds. “CLEAR” is displayed.

The Security Code function deactivates.

7Exit Security Code mode Press the Search button.

⁄

•If a wrong security code is entered, “ERROR” is displayed. Enter a correct security code.

Demonstration mode setting

Setting the demonstration mode as follows;

Display

 

Setting

“DEMO ON”

 

The Demonstration mode function is ON.

“DEMO OFF”

 

Exit Demonstration mode (Normal mode).

1Enter Menu mode

Press the Search button for at least 1 second. “MENU” is displayed.

2Select Demonstration mode Press the [FM+] or [AM–] button. Select the “DEMO” display.

3Set the Demonstration modePress the [AUD] knob for at least 2 seconds.4Exit Demonstration mode Press the Search button.

English 11