For operating KCA-BT100 (Optional)

To control KCA-BT100, operate as follows;

To make setting for <Selecting the Dialing Mode>, select <Menu system> (page 6). Pressing the [AUD] knob for at least 1 second after selecting the "D.MODE" item allows you to enter the dialing method selection mode. To exit from dialing method selection mode, press Search button.

To make <Disconnecting a Call>, <Clearing the Disconnection Message>, and <Rejecting an Incoming call>, press [DISP] button for at least 1 second.

Moreover, some displays are different from the description of KCA-BT100 Instruction Manual.

Displays of KCA-BT100 Instruction

 

Actual displays on this unit

Manual

 

 

“DISCONCT”

 

“HF D-CON”

“CONNECT”

 

“HF CON”

“PHN-DEL”

 

“DVC-DEL”

“P-STATUS”

 

“D-STATUS”

“BT-CON Y”

 

“HF-CON Y”

“BT-CON N”

 

“HF-CON N”

Menu Glossary

•ICON

Sets the Graphics mode of the display during normal playback condition.

ON1: Turns on.

ON2: Displays an animation.

OFF: Turns off.

•SWPRE (Switching Preout)

Switches the preout between rear output (“R”) and subwoofer output (“SW”).

•SPRM (Supreme)

Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding at low bit rate (less than 128Kbps, Sampling frequency is 44.1kHz).

Supplementing is optimized by compression format (MP3 or WMA) and processed according to bit rate.

The effect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range.

•AUTO1, AUTO2, MANUAL (Tuning mode select) Select a tuning mode of the radio.

Tuning mode

 

Display

 

Operation

Auto seek

 

“AUTO1”

 

Automatic search for a station.

Preset station seek

 

“AUTO2”

 

Search in order of the stations in the

 

 

 

 

Preset memory.

Manual

 

“MANUAL”

 

Normal manual tuning control.

•AUX

When this is set to ON, AUX source can be selected. ON1: Outputs the sound of external unit connected

to the AUX terminal when switched to AUX source.

ON2: Activates the attenuator function when switched to AUX source.

Turn off the attenuator function when listening to output from external unit. This prevents the noise when no external unit is connected to AUX terminal.

OFF: Disables the selection of AUX source.

Set to OFF when not using the AUX terminal.

•CD READ

Sets the method for reading CD.

When unable to play special format CD, set this function to “2” to force playing. Note that some music CD may be unplayable even when set to “2”. In addition, audio files cannot be played when set to “2”. Normally, keep this set to “1”.

1 : Automatically distinguishes between audio file disc and music CD when playing disc.

2 : Forces playing as music CD.

English 15