Connecting Wires to Terminals
USB connector |
| |
AUX input (Stereo) | FM/AM antenna input | |
Use the | ||
|
type and does not have any resistance.
Front side
Wiring harness (Accessory1)
| Front output |
| |
Fuse (10A) | Rear output/ Sub Woofer output |
|
To Kenwood disc changer/ External optional accessory
⁄To connect these leads, refer to the relevant instruction manuals.
White |
|
White/Black | To front left speaker |
Gray |
|
Gray/Black | To front right speaker |
Green |
|
Green/Black | To rear left speaker |
Purple |
|
Purple/Black | To rear right speaker |
If no connections are made, do not let the wire come out from the tab.
Power control wire (Blue/White)
P.CONT
Motor antenna control wire (Blue)
ANT.
CONT
TEL mute wire (Brown)
MUTE
Car fuse box
Ignition wire (Red) | ACC |
Battery wire (Yellow)
Ground wire (Black) - (To car chassis)
When using the optional power amplifier, connect to its power control terminal.
Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film or short
Connect to the terminal that is grounded when either the telephone rings or during conversation.
⁄Tomanual.connect the Kenwood navigation system, consult your navigation
Ignition key switch
Car fuse box (Main fuse)
Battery
18