Menu system

In Standby mode

Activating Security Code

Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is required to turn on the audio unit when it is removed from the vehicle. Indication of this Security Code activation prevents your precious audio unit from stealing.

•Set the Security Code when the <Demonstration mode Setting> (page 54) is set to OFF.

•You can set the Security Code with a 4 digit number of your choice.

•The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up.

1Enter Standby

Press the [SRC] button. Select the "STANDBY" display.

2Enter Menu mode

Press the [MENU] button for at least 1 second. When "MENU" is displayed, "Security Set" is also displayed.

3Enter Security Code mode

Press the Control knob for at least 1 second. When "Enter" is displayed, "Security Set" is also displayed.

4Select the digits to enter

Push the Control knob towards [4] or [¢].

5Select the Security Code numbers

Push the Control knob towards [FM] or [AM].

6Repeat steps 4 and 5, and complete the Security Code.

7Confirm the Security Code

Press the Control knob for at least 3 seconds. When "Re-Enter" is displayed, "Security Set" is also displayed.

8Do the step 4 through 7 operation, and reenter the Security Code.

"Approved" is displayed.

The Security Code function activates.

9Exit Security Code mode Press the [MENU] button.

•If you enter the wrong Code in steps 4 through 6, repeat from step 4.

Resetting the Security Code function when the audio unit is first used after removed from the battery power source or the Reset button is pressed

1Turn the power ON.

2Do the step 4 through 7 operation, and enter the Security Code.

"Approved" is displayed. Now, you can use the unit.

•When the Security Code function is activated, "Security Set" changes to "Security Clear".

•To deactivate the Security Code function, see the next section <Deactivating Security Code>.

In Standby mode

Deactivating Security Code

To deactivate the Security Code function.

1Select Security Code mode

Push the Control knob towards [FM] or [AM]. Select the "Security Clear" display.

2Enter Security Code mode

Press the Control knob for at least 1 second. When "Enter" is displayed, "Security Clear" is also displayed.

3Select the digits to enter

Push the Control knob towards [4] or [¢].

4Select the Security Code numbers

Push the Control knob towards [FM] or [AM].

5Repeat steps 3 and 4, and complete the Security Code.

6Press the Control knob for at least 3 seconds. "Clear" is displayed.

The Security Code function deactivates.

•If a wrong security code is entered, "Error" is displayed. Enter a correct security code.

42 English