Menu system
In Standby mode
Selectable Illumination
Selecting the button illumination color as green or red.
Display | Setting |
"Button : Red" | The illumination color is red. |
"Button : Green" | The illumination color is green. |
Display Illumination Control
This function turns off the display when you perform no operation for 5 seconds. This function is effective when you are driving at night.
Display | Setting |
"Display : ON" | Keeps the display on. |
"Display : OFF" | Turns off the display when you perform no |
| operation for 5 seconds. |
•Set the Display Illumination Control when the <Demonstration mode Setting> (page 54) is set to OFF.
•When the display is off, pressing any key will turn on the display.
•When the display is off, you cannot perform any operation except for the following:
•Volume
•Attenuator
•Selecting the source
•Ejecting the disc
•Faceplate Angle Adjustment
•Turning off the power
•During function control, such as the Menu System, the display stays on.
In Standby mode
Dimmer
Dimming this unit’s display automatically when the vehicle light switch is turned ON.
Display | Setting |
"Dimmer : ON" | The display dims. |
"Dimmer : OFF" | The display doesn’t dim. |
In Standby mode
Built-in Amp Setting
Controlling the
Turning OFF this control enhances the preout quality.
Display | Setting |
"AMP : ON" | The |
"AMP : OFF" | The |
In Standby mode
G-Counter Level set
Calibrating
Display | Setting | ||
Counter is easy to go up. | |||
| … |
| |
|
|
|
|
Counter is hard to go up. | |||
•In the case of driving situations calling for few accelerations, set the
In Standby mode
G-Analyzer Reset
Resets the value of
1Select G-Analyzer Reset mode
Push the Control knob towards [FM] or [AM]. Select the "G-Reset" display.
2Enter G-Analyzer Reset mode
Press the Control knob for at least 1 second.
3Select the Reset item
Push the Control knob towards [FM] or [AM].
Horsepower Analysis.
44 English