Menu system

G-Analyzer Horsepower Analysis

This measures the horsepower and displays graph and max power. It automatically saves the highest record.

•Do not use G-Analyzer Horsepower Analysis on the Public roads.

•Do not use this product in any way that prevents you from driving safely.

•Follow all driving laws and use common sense when using this product.

•Before alternating G-Analyzer Horsepower Analysis, you are required to setup <G-Analyzer Horsepower Gauge setup> (page 45).

1Select the G-Analyzer Horsepower Analysis mode

Push the Control knob towards [FM] or [AM]. Select the "Horsepower" display.

2Enter G-Analyzer Horsepower Analysis mode

Press the Control knob for at least 1 second. "Stop" is displayed.

Previous max power and record are displayed.

3Begin measurement Press the Control knob. "Ready" is displayed.

4Start the car "Measure" is displayed.

After 15 seconds of measurement, the result is displayed.

Display the result

The graph shows the variation in horsepower between 0.1 to 15.0 seconds. The maximum power is displayed in red and the markings provided at intervals of 5 seconds are displayed in blue.

•Pressing the Control knob also begins the measurement. To prevent danger, push the control knob before starting the car.

5To display the maximum power in the section:

Push the Control knob towards [4] or [¢].

Each time you push the Control knob, the maximum power in the section is displayed.

6Exit G-Analyzer Horsepower Analysis mode Press the [MENU] button.

•Like your vehicle’s speedometer, G-Analyzer is no more than a measuring function. The HP or G value measured by this unit may not be completely accurate due to its simplified method of measurement. The G-Analyzer is only for reference and should not be used to confirm the horsepower specifications of your vehicle.

•Measuring after starting the car lowers the accuracy.

•The record will not be renewed if the measurement is discontinued.

•The graph’s scale adjusts automatically to the horsepower value.

•The value of max power and record can be reset by <G-Analyzer Reset> (page 44).

Function of the KDC-X890

In Standby mode

G-Graphic Select

Select the picture to display on G-Graphic.

Display

Setting

"G-Graph : Default"

Display default picture.

"G-Graph : Custom"

Display downloaded picture.

•G-Graphic pictures cannot be selected unless downloaded beforehand. To download G-Graphic pictures, refer to <Picture downloading> (page 50).

46 English