Function of the KDC-8021
Fine-tuning so that the System Q value is optimal when setting
the speaker type.
1Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2Enter Speaker Setting mode
Press the [Q] button.
"Speaker Setting" is displayed.
3Select the Speaker type
Press the [4] or [¢] button.
Each time the button is pressed the setting switches as shown
below.

Speaker Setting

In Woofer setting mode
Woofer type Display
OFF "Woofer OFF"
12 in. A type "12in type A"
10 in. A type "10in type A"
12 in. B type "12in type B"
10 in. B type "10in type B"
12 in. C type "12in type C"
10 in. C type "10in type C"
8 in. type "8inch"
12 in. D type "12in type D"
10 in. D type "10in type D"
5Exit Speaker & Woofer Setting mode
Press the [Q] button.
Function of the KDC-PSW9521/KDC-M907/KDC-M9021
Speaker setting allows the System Q settings to be fine-tuned
according to the type of speakers.
Woofer setting allows for Network configuration according to the
type of subwoofers.
1Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2Enter Speaker & Woofer Setting mode
Press the [Q] button.
"Speaker Setting" is displayed.
3Select the Setting mode
Press the [FM] or [AM] button.
Each time the button is pressed it switches between Speaker
setting mode and Woofer setting mode.
4Select the Speaker and Woofer type
Press the [4] or [¢] button.
Each time the button is pressed the setting switches as shown
below.
In Speaker setting mode
Speaker type Display
OFF "OFF"
For 5 & 4 in. speaker "5/4 inch"
For 6 & 6x9 in. speaker "6*9/6inch"
For the OEM speaker "O.E.M."

Speaker & Woofer Setting

General features
— 12 —
English
KDC-M907 _U.S 04.2.4 4:17 PM Page 12