This adjustment can be done when the <Synchronize Clock> (page
31) is set as OFF.
1Select Clock Adjustment mode
Press the [FM] or [AM] button.
Select the "Clock Adjust" display.
Manual Clock Adjustment
Setting the operation check sound (beep sound) ON/OFF.
Display Setting
"Beep ON" Beep is heard.
"Beep OFF" Beep canceled.
Touch Sensor Tone
5Reenter the Mask Key's signal
Hold down the transmit button on the Mask Key until the full
transmit level indicator lights up in the display.
"BAR BAR BAR"/"APPROVED" is displayed, and the Mask Key
function activates.
Press the Reset button and when it's removed from the
battery power source
1Turn the power ON
The vehicle engine turns ON.
"BAR BAR 1"/"TRANSMIT1" is displayed.
2Enter the Mask Key's signal
Repeat steps 4 and 5 above, and enter the Mask Key's signal.
"BAR BAR BAR"/"APPROVED" is displayed.
The unit can be used.
Because authorization by the Mask Key is required when it's
removed from the vehicle, personalizing this unit by using the
Mask Key is a help in preventing theft.
1Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2Enter Menu mode
Press the [MENU] button for at least 1 second.
When "MENU" is displayed, "Mask key" is displayed.
3Enter Mask key mode
Press the [4] or [¢] button for at least 1 second.
"BAR BAR 1"/"TRANSMIT1" is displayed.
4Enter the Mask Key's signal
Hold down the transmit button on the Mask Key until the full
transmit level indicator lights up in the display.
"BAR BAR 2"/"TRANSMIT2" is displayed.
•Keep the Mask Key close to the signal sensor when you transmit
the Mask Key's signal.
•If the Mask Key's signal does not be received correctly, the display
will return to "BAR BAR 1"/"TRANSMIT1" . In this case, repeat
the procedure in step 4.
Mask Key
Menu system
— 30 —
English
KDC-M907 _U.S 04.2.4 4:17 PM Page 30