It switches automatically when a news bulletin starts even if the
radio isn't being listened to. Also, the time interval when
interrupt is prohibited can be set.
Display and Setting
"News OFF"
"News 00min"
"News 90min"
When "News 00min" — "News 90min" is set, the News Bulletin
Interrupt function is ON.
When the news bulletin starts, "News" is displayed, and it
switches to the news bulletin.
If you choose the "20min" setting, further news bulletins will not
be received for 20 minutes once the first news bulletin is received.
The news bulletin volume is the same level that was set for traffic
information (page 20).
This function is only available if the desired station sends PTY-code
for news bulletin or belongs to <Enhanced Other Network>-
Network sending PTY-code for news bulletin.
When the News Bulletin Interrupt function is ON, it switches to an
FM station.

News Bulletin with Timeout Setting

Setting the central frequency boosted by B.M.S.
Display Setting
"AMP Freq Normal" Boost with the normal central frequency
"AMP Freq Low" Drop the normal central frequency 20%

B.M.S. Frequency Offset

Adjust the bass boost level of the external amplifier using the
main unit.
Display Setting
"AMP Bass Flat" Bass boost level is flat.
"AMP Bass +6" Bass boost level is low (+6dB).
"AMP Bass +12" Bass boost level is mid (+12dB).
"AMP Bass +18" Bass boost level is high (+18dB).
Refer to the catalog or instruction manual for power amplifiers that
can be controlled from this unit.
For amplifiers there are the model that can be set from Flat to +18
dB, and the model that can be set from Flat to +12 dB.
When an amplifier that can only be set to +12 is connected to the
unit, "AMP Bass +18" won't work correctly even if it's selected.

B.M.S. (Bass Management System)

Makes the sound different for the front channel and rear
channel.
Display Setting
"Zone 2 OFF" Both the front and rear are Auxiliary input sound.
"Zone 2 ON" The front is this unit's internal source, and the
rear is Auxiliary input sound.
When the Dual Zone System is ON, there is no rear channel audio
control or other effect.
When the Dual Zone System is being used the front channel can't
be used with External disc source.
When you set the Dual zone system to ON while the non-fading
preout is switched ON, the sound of the non-fading preout isn’t
output.

Dual Zone System <In Auxiliary input source>

Menu system
— 34 —
English
KDC-M907 _U.S 04.2.4 4:17 PM Page 34