— 6 —
English

Notes on playing MP3/WMA(KDC-PSW9521)/ MP3(KDC-M907/KDC-M9021)

This unit can play MP3(MPEG1, 2 Audio Layer 3)/WMA. Note,
however, that the MP3/WMA recording media and formats
acceptable are limited. When writing MP3/WMA, pay attention to
the following restrictions.

Acceptable media

The MP3/WMA recording media acceptable to this unit are CD-ROM,
CD-R, and CD-RW.
When using CD-RW, do full format not quick format to prevent
malfunction.

Acceptable medium formats

The following formats are available for the media used in this unit. The
maximum number of characters used for file name including the
delimiter (".") and three-character extension are indicated in
parentheses.
•ISO 9660 Level 1 (12 characters)
•ISO 9660 Level 2 (31 characters)
•Joliet (64 characters)
•Romeo (128 characters)
Up to 200 characters can be displayed in the long file name format.
For a list of available characters, see the instruction manual of the
writing software and the section Entering file and folder names below.
The media reproducible on this unit has the following limitations:
•Maximum number of directory levels: 8
•Maximum number of files per folder: 255
•Maximum number of characters for folder name: 64
•Maximum number of folders: 50
MP3/WMA written in the formats other than the above may not be
successfully played and their file names or folder names are not
properly displayed.

Settings for your MP3/WMA encoder and CD writer

Do the following setting when compressing audio data in WMA data
with the WMA encoder.
•Transfer bit rate: 64k —192 kbps
•Sampling frequency: 32k, 44.1k, 48k Hz
When you use your CD writer to record MP3/WMA up to the
maximum disc capacity, disable additional writing. For recording on an
empty disc up to the maximum capacity at once, check Disc at Once.

Entering ID3 tag and Contents

Description

The Displayable ID3 tag is ID3 version
1.x.
For the character code, refer to the List
of Codes.

Entering file and folder names

The code list characters are the only file
names and folder names that can be
entered and displayed.
If you use any other character for entry, the file and folder names are
not displayed correctly. They may neither be displayed correctly
depending on the CD writer used.
The unit recognizes and plays only those MP3/WMA which have the
MP3/WMA extension (.MP3/.WMA).
A file with a name entered with characters not on the code list
may not play correctly.

Writing files into a medium

When a medium containing MP3/WMA data is loaded, the unit checks
all the data on the medium. If the medium contains a lot of folders or
non-MP3/WMA files, therefore, it takes a long time until the unit starts
playing MP3/WMA.
In addition, it may take time for the unit to move to the next
MP3/WMA file or a Track Search or Album Search may not be
performed smoothly.
Loading such a medium may produce loud noise to damage the speakers.
•Do no attempt to play a medium containing a non-MP3/WMA file
with the MP3/WMA extension.
The unit mistakes non-MP3/WMA files for MP3/WMA data as long as
they have the MP3/WMA extension.
•Do not attempt to play a medium containing non MP3/WMA.
KDC-M907 _U.S 04.2.4 4:17 PM Page 6