••••••••
IN (Blink): The CD player section is not operating properly.E59
➪Reinsert the CD. If the CD cannot be ejected or the
display continues to flash even when the CD has
been properly reinserted, please switch off the
power and consult your nearest service center.
Unsupported File: A MP3/WMA is played with a format that this unit can't
support.E63
➪----
Protected File: A copy-protected file is played.E64
➪----
English
— 48 —— 48 —
Mecha Error: Something is wrong with the disc magazine. Or the
unit is malfunctioning for some reason.E99
➪Check the disc magazine. And then press the reset
button on the unit. If the "Mecha Error" code does
not disappear, consult your nearest service center.
Hold Error: The protective circuit in the unit activates when the
temperature inside the automatic disc changer
exceeds 60°C (140°F), stopping all operation.E0d
➪Cool down the unit by opening the windows or
turning on the air conditioner. As the temperature
falls below 60°C (140°F), the disc will start playing
again.
NO NAME: Attempted to display DNPS during the CD play having
no disc names preset.E51
NO TITLE: Attempted to display the disc title or track title while
the MD having no MD title is being played.E53
NO TEXT: • Attempted to display the disc text or track text
while the CD having no CD text is being played.E54
•Attempted to display text during reception of the
station that isn't sending text data.E55
•Attempted to display the ID3 tag while the
MP3/WMA having no ID3 tag is being played.E52
Waiting: Radio text data is being received.E56
Load: Discs are being exchanged in the Disc changer.E57-1
Reading: The unit is reading the data on the disc.
NO ACCESS: After setting it in the Disc Changer, DNPP was done
without having it been played at least 1 time.E58
Troubleshooting Guide
KDC-M907 _U.S 04.2.4 4:17 PM Page 48