Kenwood KDC-W534U, KDC-W5534U, KDC-W6534U Attenuator, System Q, Audio Control, Range, Display, Display, Sound setting, Press the [ATT] button, 5Exit Audio Control mode Press any button

Attenuator

Turning the volume down quickly.

Press the [ATT] button.

Each time you press the button, the Attenuator turns ON and OFF.

When the Attenuator is ON, the "ATT" indicator blinks.

System Q

Selecting the best sound setting preset for different types of music.

1Select the source to set Press the [SRC] button.

2Select the Sound type Press the [Q] button.

When you press the button once, the current sound setting is displayed.

Each time you press the button, the sound setting alternates.

Sound setting	Display
User memory*	"USER"
Rock	"ROCK"
Pops	"POPS"
Easy	"EASY"
Top 40	"TOP 40"
Jazz	"JAZZ"
Natural	"NATURAL"

•* User memory: The values set on the <Audio Control> (page 11).

KDC-W5534U/W534U does not have the User memory function so the values of Bass, Middle, and Treble set in audio control are replaced to the System Q values and "USER" is not displayed when the System Q setting is changed.

•Change each setting value with the <Speaker Setting> (page 12).

First, select the speaker type with the Speaker setting.

Audio Control

1Select the source to adjust Press the [SRC] button.

2Enter Audio Control mode Press the [VOL] knob.3Select the Basic Audio item to adjust Press the [VOL] knob.

Each time you press the knob, the item to be adjusted alternates between the items shown in the table below.

4Adjust the Basic Audio item Turn the [VOL] knob.

Adjustment Item	Display	Range
Subwoofer level*1,2,3	"SW L"	–15 — +15
Bass level*4	"BAS L"	–8 — +8
Middle level*4	"MID L"	–8 — +8
Treble level*4	"TRE L"	–8 — +8
Balance	"BAL"	Left 15 — Right 15
Fader	"FAD"	Rear 15 — Front 15

Exit Audio Control mode (Volume control mode)

•*1 Function of the KDC-W6534U.

•*2 You can control this item when <Switching preout> (page 30) is set to "SWPRE SW".

•*3 You can control this item when <Subwoofer Output> (page 12) is set to "SW ON".

•*4 Source tone memory: Puts the set up value in the memory per source.

5Exit Audio Control mode Press any button.

Press a button other than the [VOL] knob and [ATT] button.

English 11