Installation

Installation

Metal mounting strap (commercially available)

Firewall or metal support

Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.

Self-tapping screw (commercially available)

Screw (M4X8) (commercially available)

Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).

Screwing the Faceplate on the Unit

If you want to fasten the faceplate to the main unit so that it does not fall off.

1Refer to the section <Removing the hard rubber frame> (page 41) and then remove the hard rubber frame.

2Drop open the faceplate by pressing the Release button.

3Tighten the screw (ø2 × 5 mm) (Accessory4) and bracket (Accessory5) in the hole shown on the diagram.

Accessory5

Accessory4

4Tighten the screw (ø2 × 5 mm) (Accessory4) and bracket (Accessory6) in the hole shown on the diagram.

Accessory6

Accessory4

Never insert the screws in any other screw hole than the one specified. If you screw them in another hole, it will contact and may cause damage to the mechanical parts inside the unit.

40 English