Menu system
In Standby mode
Dimmer
Dimming this unit’s display automatically when the vehicle light switch is turned ON.
Display | Setting |
"DIM ON" | The display dims. |
"DIM OFF" | The display doesn’t dim. |
Function of the
In Standby mode
Switching preout
Alternating the preout between the rear and subwoofer. (With the subwoofer the sound outputs without being effected by fader control.)
Display | Setting |
"SWPRE R" | Rear preout. |
"SWPRE SW" | Subwoofer preout. |
Function of the
In Standby mode
Built-in Amp Setting
Controlling the
Turning OFF this control enhances the preout quality.
Display | Setting |
"AMP ON" | The |
"AMP OFF" | The |
Function of the
Other than Standby mode
B.M.S. (Bass Management System)
Adjust the bass boost level of the external amplifier using the main unit.
Display | Setting |
"BMS FLT" | Bass boost level is flat. |
"BMS +6" | Bass boost level is low (+6dB). |
"BMS +12" | Bass boost level is mid (+12dB). |
"BMS +18" | Bass boost level is high (+18dB). |
•Refer to the catalog or instruction manual for power amplifiers that can be controlled from this unit.
•For amplifiers, there are the models you can set from Flat to +18 dB, and the models you can set from Flat to +12 dB.
When an amplifier that can only be set to +12 is connected to the unit, "BMS +18" will not work correctly even if it is selected.
Function of the
Other than Standby mode
B.M.S. Frequency Offset
Setting the central frequency, boosted by B.M.S.
Display | Setting |
"BMSF NML" | Boost with the normal central frequency. |
"BMSF LOW" | Drop the normal central frequency 20%. |
30 English