Kenwood KDC-W534U, KDC-W5534U, KDC-W6534U Audio Preset Recall, Demonstration mode Setting, Display, Setting, Enter Menu mode, 2Enter Menu mode, Enter Audio Preset mode, Select Audio Preset mode

•When you press the Reset, all the sources will be the setting value which is registered.

•The following items cannot be registered. Volume, Balance, Fader, Loudness, Volume offset

Function of the KDC-W6534U

Other than Standby mode

Audio Preset Recall

Recalling the sound setup registered by <Audio Preset Memory> (page 34).

1Select the source Press the [SRC] button.

2Enter Menu mode

Press the [MENU] button for at least 1 second. "MENU" is displayed.

3Select Audio Preset mode

Push the Control knob towards [FM] or [AM]. Select the "A-PRESET" display.

4Enter Audio Preset mode

Press the Control knob for at least 1 second.

5Select the Audio Preset RecallPush the Control knob towards [FM] or [AM]. Select the "RECALL" display.6Recall the Audio Preset

Press the Control knob for at least 2 seconds. The "RECALL" display blinks 1 time.

7Exit Audio Preset mode Press the [MENU] button.

•The User memory of <System Q> (page 11) is changed to the value which was recalled.

•The source tone memory item of <Audio Control> (page 11) is changed to the value which was recalled by the selected source.

In Standby mode

Demonstration mode Setting

Sets the demonstration mode.

1Select the Demonstration modePush the Control knob towards [FM] or [AM]. Select the "DEMO" display.2Set the Demonstration mode

Press the Control knob for at least 2 seconds. Each time you press the knob at least 2 seconds, the Demonstration mode alternates between the settings shown in the table below.

Display	Setting
"DEMO ON"	The Demonstration mode function is ON.
"DEMO OFF"	Exit Demonstration mode (Normal mode).

English 35