In Standby mode

Manual Clock Adjustment

•You can do this adjustment when the <Synchronize Clock> (page 29) is set as OFF.

1Select Clock Adjustment modePush the Control knob towards [FM] or [AM]. Select the "CLK ADJ" display.2Enter Clock Adjust modePress the Control knob for at least 1 second. The clock display blinks.3Adjust the hours

Push the Control knob towards [FM] or [AM].

Adjust the minutes

Push the Control knob towards [4] or [¢].

4Exit Clock adjustment mode Press the [MENU] button.

In Standby mode

Synchronize Clock

Synchronizing the RDS station time data and this unit’s clock.

Display

Setting

"SYNC ON"

Synchronizes the time.

"SYNC OFF"

Adjust the time manually.

• It takes 3 to 4 minutes to synchronize the clock.

In Standby mode

DSI (Disabled System Indicator)

A red indicator will blink on the unit after the faceplate is removed, warning potential thieves.

Display

Setting

"DSI ON"

LED flashes.

"DSI OFF"

LED OFF.

Function of the KDC-W6534U/KDC-W5534U In Standby mode

Selectable Illumination

Selecting the button illumination color as green or red.

Display

Setting

"KEY RED"

The illumination color is red.

"KEY GRN"

The illumination color is green.

Display Illumination Control

This function turns off the display when you perform no operation for 5 seconds. This function is effective when you are driving at night.

Display

Setting

"DISP ON"

Keeps the display on.

"DISP OFF"

Turns off the display when you perform no

 

operation for 5 seconds.

•Set the Display Illumination Control when the <Demonstration mode Setting> (page 35) is set to OFF.

•When the display is off, pressing any key will turn on the display.

•When the display is off, you cannot perform any operation except for the following:

•Volume

•Attenuator

•Selecting the source

•Ejecting the disc

•Turning off the power

•During function control, such as the Menu System, the display stays on.

English 29