Tuner Operation

Station Preset Memory

Putting a station in the memory.

1Select the frequency to put in the memory Push the Control knob towards right or left.

2Enter Preset Memory mode Select “P.MEM”.

For how to select Function Control item, refer to <Function Control> (page 6).

3Select the number to put in the memory Turn the Control knob.

4Determine the number to put in the memory Press the Control knob.

5Allow the determined number to take effect Press the Control knob.

Cancelling the Preset Memory mode Press the [FNC] button.

Preset Tuning

Recalling the stations in the memory.

1Enter Preset Tuning Select mode Turn the Control knob.

A station list is displayed.

2Select a desired station in the memory Turn the Control knob.

3Recall the station Press the Control knob.

Cancelling Preset Tuning

Press the [FNC] button.

Function of remote control

Direct Access Tuning

Entering the frequency and tuning.

1Enter Direct Access Tuning mode

Press the [DIRECT] button on the remote control.

“– – – –” is displayed.

2Enter the frequency

Press the number buttons on the remote control.

Example:

Desired frequency

 

Press button

92.1 MHz (FM)

 

[0], [9], [2], [1]

810 kHz (AM)

[0], [8], [1], [0]

Cancelling Direct Access Tuning

Press the [DIRECT] button on the remote control.

You can enter the FM band frequency in steps of a minimum of 0.1 MHz.

12 KDC-X592/ KDC-MP538U