About HD Radio (Optional)

When you connect an HD Radio, Tuner features of the unit are disabled and changed to HD Radio tuner features.

With the HD Radio tuner, you can use the similar functions of Tuner features. Refer to Tuner features for how to use the functions.

For operating KCA-BT100 (Optional)

However, the following control methods of the function for this unit may be different from the Instruction manual; therefore, refer to the following supplemental instruction.

<Dialing by Using the Quick Dialing Function>

1.Press the Control knob. Select the “DIAL” display.

2.Press the [FNC] button.

3.Select the number to recall by turning the Control knob.

4.Press the Control knob.

<Registering to the Preset Dial Number List>

1.Operation is the same. Refer to the instruction manual of KCA-BT100.

2.Press the [FNC] button.

3.Select the number to memory by turning the Control knob.

4.Press the Control knob for at least 1 second.

<Deleting a Registered Cell-Phone>

1–3. Operation is the same. Refer to the instruction manual of KCA-BT100.

4.Press the Control knob.

5.Select “YES” using the Control knob.

6.Press the Control knob.

7.Press the [FNC] button.

<Menu System>

For how to operate Menu, refer to <Function Control> in this instruction manual.

About display

Cell-Phone Status is displayed in the status display of this unit.

Moreover, some displays are different from the description of KCA-BT100 Instruction Manual.

Menu Glossary

SRC Select

 

Setting up the Source Select mode.

 

1 : Displays source icons for your choice.

 

2 : Allows you to select sources one after another.

Display

 

If this unit is not operated at least 5 seconds with

 

“OFF” selected, the display turns off. During a setup

 

mode, the display will not turn off even if 5 seconds

 

lapse.

• ILM Dimmer (illumination dimmer)

 

Reduces the key Illumination brightness.

 

AUTO: Dims the illumination in conjunction with

 

the Light switch of the vehicle.

 

MNAL1: Dims the illumination constantly.

 

MNAL2: Turns off the upper and lower illuminations,

 

and dims the left and right illuminations.

 

OFF: Does not dim the illumination.

AMP

 

Selecting “OFF” turns off the built-in amplifier.

 

Turning off the built-in amplifier improves the

 

quality of the sound from Preout.

Zone2 (Dual Zone)

 

Set the destination (front speaker “Front” or rear

 

speaker “Rear”) of the sub source (AUX IN) when the

 

Dual Zone function is turned on.

Supreme

 

Technology to extrapolate and supplement with

 

proprietary algorithm, the high-frequency range

 

that is cut off when encoding at low bit rate (less

 

than 128Kbps, Sampling frequency is 44.1kHz).

 

Supplementing is optimized by compression

 

format (AAC, MP3 or WMA) and processed

 

according to bit rate.

 

The effect is negligible with music that is encoded

 

at high bit rate, variable bit rate or has minimal high

 

frequency range.

• Receive Mode (Receive mode Setting)

 

Sets the receive mode of the HD Radio.

 

Auto: Automatically tunes to analog broadcast

 

when there is no digital broadcast.

 

Digital: Digital broadcasts only.

 

Analog: Analog broadcasts only.

CD Read

Displays of KCA-BT100 Instruction Manual

“Disconnect”

“Connect”

“Phone Delete”

“Phone Status”

Actual displays on this unit

“HF Disconnect”

“HF Connect”

“Device Delete”

“BT DVC Status”

Sets the method for reading CD.

When unable to play special format CD, set this

function to “2” to force playing. Note that some

music CD may be unplayable even when set to “2”.

In addition, audio files cannot be played when set

to “2”. Normally, keep this set to “1”.

1 : Automatically distinguishes between audio file

BT : Displays the bluetooth connection status. This indicator turns on when a cell-phone is connected to this unit.

disc and music CD when playing disc.

2 : Forces playing as music CD.

English 23