Audio Adjustments

Audio Setup

You can set Sound system , such as follows;

Adjustment Item

 

Display

 

Range

Front High Pass Filter

 

“HPF-F”

 

Through/40*1/ 60*1/80/100/

 

 

 

 

120/150/180/220*1 Hz

Rear High Pass Filter

 

“HPF-R”

 

Through/40*1/ 60*1/80/100/

 

 

 

 

120/150/180/220*1 Hz

Low Pass Filter

 

“LPF”

50*1/60/80/100*1/120/

 

 

 

 

Through Hz

Subwoofer Phase

 

“SW PHASE”

 

Reverse (180°)/ Normal (0°)

Volume offset

 

“VOL-OFFSET”

 

–8 — ±0 (AUX: -8— +8)

Loudness

 

“LOUD”

 

OFF/ON

Dual Zone System

 

“2 ZONE”

 

OFF/ON

*1 KDC-X592 only.

⁄

•Volume offset: Sets each source’s volume as a difference from the basic volume.

•Loudness: Compensates for low and high tones during low volume. (Only the low tone is compensated for when the tuner is selected as a source.)

•Dual Zone System

Main source and sub source (Auxiliary input) output Front channel and Rear channel separately.

-Set up the channel of sub source by “Zone2” of <Function Control> (page 6).

-Select Main source by [SRC] button.

-Adjust the volume of Front channel by [AUD] knob.

-Adjust the volume of Rear channel by <Audio Control> (page 15) or [5]/[∞] button on the remote control

(page 20).

-The Audio Control has no effect on sub source.

1Select the source to adjust

For how to select source item, refer to <Power/ Source Select button> of <Basic Operation> (page 4).

2Enter Audio Setup mode

Press the [AUD] knob for at least 1 second.

3Select the Audio Setup item to adjust Press the [AUD] knob.

4Adjust the Audio setup item Turn the [AUD] knob.

5Exit Audio Setup mode

Press the [AUD] knob for at least 1 second.

Speaker Setting

Fine-tuning so that the System Q value is optimal when setting the speaker type as follows;

Speaker type

 

Display

OFF

 

 

“OFF”

For 5

& 4 in. speaker

 

“5/4inch”

For 6

& 6x9 in. speaker

 

“6x9/6inch”

For the OEM speaker

 

“O.E.M.”

1Enter Standby

Select the “STANDBY” display.

For how to select source item, refer to <Power/ Source Select button> of <Basic Operation> (page 4).

2Enter Speaker Setting mode Press the [AUD] knob.

“SP SEL” is displayed.

3Select the Speaker type Turn the [AUD] knob.

4Exit Speaker Setting mode Press the [AUD] knob.

16 KDC-X592/ KDC-MP538U