Connecting Wires to Terminals

To USB device USB connector (1m)

⁄

Do not remove the cap when you do not use the USB cable. The connector will cause the unit to malfunction if it gets in touch with any metallic part of the vehicle.

Steering remote control

 

 

(Light Blue/Yellow)

 

Rear output

REMO.CONT

L

R Front output

To use the steering wheel

 

Sub Woofer output

remote control feature, you

 

 

need to an exclusive remote

 

 

adapter (not supplied) matches

 

 

your car is required.

 

 

 

 

FM/AM antenna input

Wiring harness (Accessory1)

 

AUX

AUX input (Stereo)

 

 

 

 

Use the mini-plug which is stereo type and does not

Fuse (10A)

 

have any resistance.

 

 

To Kenwood disc changer/ External optional accessory

⁄To connect these leads, refer to the relevant instruction manuals.

White

 

White/Black

To front left speaker

Gray

 

Gray/Black

To front right speaker

Green

 

Green/Black

To rear left speaker

Purple

 

Purple/Black

To rear right speaker

If no connections are made, do not let the wire come out from the tab.

Power control/Motor antenna control wire (Blue/White)

P.CONT

Motor antenna control wire (Blue)

ANT.

CONT

TEL mute wire (Brown)

MUTE

Connect either to the power control terminal when using the optional power amplifier, or to the antenna control terminal in the vehicle.

Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film-type antenna.

Connect to the terminal that is grounded when either the telephone rings or during conversation.

⁄Tomanual.connect the Kenwood navigation system, consult your navigation

Dimmer control wire (Orange / White)

ILLUMI

Car fuse box

Ignition wire (Red)

ACC

Battery wire (Yellow)

Ground wire (Black) - (To car chassis)

To car light control switch

Ignition key switch

Car fuse box (Main fuse)

Battery

26 KDC-X592/ KDC-MP538U