| Category Item |
| Setting |
| Entry Setting overview |
| Condition Page | ||||||
M.RDM |
|
|
| “ON”/ — |
|
|
| When set to “ON”, plays the music in the disc changer |
|
|
|
|
|
|
|
|
|
|
|
| randomly. |
|
|
|
|
T.REP |
|
|
| “ON”/ — |
|
|
| When set to “ON”, plays the music repeatedly. |
|
|
|
|
D.REP |
| “ON”/ — |
|
|
| When set to “ON”, plays the music on the disc repeatedly. |
|
|
|
| ||
*Factory setting
* Function of
Displayed item is depending on currently selected source or mode. The mark in Condition column shows the condition to which the item is displayed.
: Can be set in other than standby state.
: Can be set in standby state.
: Can be set while Audio file source of CD/USB/iPod.
: Can be set while Audio file source of CD/USB (excluding iPod).
: Can be set while CD/ Disc changer source.
: Can be set while Disc changer source.
: Can be set during Tuner source.
: Can be set during FM reception.
: Can be set while accessing AUX source.
: Can be set while HD Radio source.
: Can be set during Satellite radio source.
: Can be set only during playback of the iPod source. (USB source used when the iPod is connected)
: Can be set for sources other than the standby source by setting “2 ZONE” of <Audio Setup> (page 16) to “ON”.
: Refer to the reference page.
⁄
•Refer to the respective page for information on how to set the items with reference page number.
•Only the items available to the current source are displayed.
•Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned ON. In such a situation, turn it OFF.
1Enter Function Control mode Press the [FNC] button. Function icon is displayed.
2Select your desired setup item| Operation type | Operation |
|
Movement between items | Turn the Control knob. |
|
Selection of item | Press the Control knob. |
|
Return to previous item | Press the [FNC] button or “ | ” icon |
Repeat selection and determination until your desired setup item is selected.
Example: | MENU | DISP |
MENU | DISP |
|
| TYPE | TEXT |
Turn the Control knob to select a setting value, and then press the Control knob.
Some items require you to keep pressing the Control knob for 1 or 2 seconds so that you can make a setting. For these items, the time during which you need to keep pressing the Control knob is displayed in the Entry column in seconds. For the functions accompanied by the description of the setting procedure and so forth, the reference page numbers are displayed.
4Exit Function Control modePress the [FNC] button for at least 1 second.English 7